2011-2017 BMW X3 sDrive 28i
2011-2017 BMW X3 xDrive 28i/35i
2015-2018 BMW X4 xDrive 28i/35i
INSTALLATION & OPERATING INSTRUCTIONS
Stealth’s fully welded tow hitch for the BMW is strong and durable with a Lifetime Guarantee. The combination of a stainless steel latch block and powder coat finish provides excellent rust protection allowing you to enjoy your eco-adventures and not worry about the function of your hitch.
|
Hitch Towing Capacity
|
|
- 6,000 lbs - gross trailer weight (GTW)
|
|
- 600 lbs - tongue weight (TW)
|
|
Rack Receiver Capacity
|
|
- 600 lbs - 2" receiver (standard)
|
|
- 300 lbs - 1-1/4" receiver
|
* Do not exceed the weight ratings of the hitch, trailer, or vehicle.
* See trailer and vehicle manufacturer’s information for ratings.
Why Stealth Hitches are chosen over competitor hitches.
|
|
- No visible cutouts in the bumper.
|
|
|
- No welding or drilling required.
|
- Protects the crumple zone of the vehicle.
|
- No permanent attachments hanging under the vehicle.
|
- Any foot activated hatch releases remain active.
|
|
- Integral theft resistant lock and key.
|
- Great for bikes, extra cargo, skis and more.
|
What's included in each BMW X3/X4 hitch package?
Stealth Hitches offers a rack only package and a combo package with tow and rack options. The same cross beam and vertical latch block are used on all packages so if you need to upgrade to tow later you can with the BMW Towing Conversion Kit.
The BMW X3 Hitch hitch Rack Package comes with standard 2" detachable rack receiver that accepts current versions of bike racks, ski racks, cargo platforms, and other square tube accessories. A wiring harness is not required if rack connections are the customers only application.
The BMW X3 Hitch Combo Hitch Package uses a detachable ball mount that operates differently than a typical square tube receiver hitch. When inserted into the stainless-steel receiver block, a tight connection is created to the vehicle frame, eliminating the jerking and banging associated with square tube receivers type hitches during starts and stops. This solid connection creates less wear and tear on the vehicle transmission and is a more pleasurable ride for the passengers.
Stealth Standard Wiring Harness
Our "Stealth" wiring harness and controller is specifically designed to monitor and duplicate the tail light functions. Drawing current from the tail light circuits can cause vehicle faults, especially on European vehicles. Our controller draws current directly from the battery to eliminate this issue. For vehicles with numerous trailer lights, Stealth harnesses are designed to increase the current capacity from the typical 5-amp solid state limitation to a full 20 amps.
Active Harness
We also offer an active harness option for added features such as:
- Disabling the back-up sensor to eliminate beeping while backing up to your trailer.
- Rear camera zoom at the trailer connection point for positioning the vehicle and preventing damage to the vehicle.
- Stability control to limit trailer sway.
- This harness requires the same programming as the factory hitch harness.
- We can program your vehicle remotely, preventing the need to take the car to a dealer or BMW shop for programming.
